Faber ARKEA Manual De Instrucciones página 9

N.B. Before proceeding with installation the Hood must be raised to a height of at least 650
mm above the cooker hob by means of a support or with the assistance of another
person. Take care not to exceed the maximum hood extension indicated in the
dimensional drawing.
This operation is essential, as the Hood Cables are to be connected to the Plate mounted
on the ceiling, and this must be done without the weight of the Hood bearing down on
the structure.
The system used to fix the 4 Cables comprises 3 components:
• Threaded pawl (a) already mounted on the ceiling Plate.
• Cable locking screw (b), provided.
• Safety knob (c), provided.
• Insert the hood power supply cable into the
hole provided in the cover.
Warning: Do not break or remove the tie
that fixes the power supply cable to the hood
EN
CONNECTING HOOD-PLATE CABLES
• Pass the 4 cables (connected to the
hood canopy) through the respective
holes in the plate cover, after opening it
as above, making sure that it faces in
the same direction as the plate
connected to the ceiling.
a
b
c
9 9