Safety Measures - Crosscall CORE-X3 Manual De Usuario

SAFETY MEASURES

• You have just bought an IP68 compliant mobile phone. To
guarantee optimal use and watertightness, ensure that all the
flaps covering the USB connectors and the earphone jack are
correctly closed.
• Do not open the back cover of the device if it is in the water or
in a very humid environment.
• The rubber seals attached to the flaps are key components of
the device. Ensure that the rubber seal is not damaged when
you open or close the watertight cover. Ensure that the seal is
free from any debris, such as sand or dust, to avoid damaging
the device.
• The flaps covering the openings may come loose in the event
of a fall or shock. Ensure that all the covers are properly aligned
and completely closed.
• If the device has been submerged in water or the
microphone or loud speaker is wet, the sound may not
be clear during a call. Ensure that the microphone or
loud speaker is clean and dry by wiping it with a dry cloth.
Do not push anything sharp (toothpick, metal object or other)
into the microphone or loud speaker because this could
damage the watertight membrane.
• If you put your phone in sea water or chlorinated water, rinse
it in fresh water.
• If the device gets wet, dry it thoroughly with a soft, clean cloth.
• The water resistance of the device may cause slight vibrations
in certain conditions. These vibrations, for example when the
volume is turned up high, are entirely normal and do not affect
the performance of the device.
• Temperature fluctuation can lead to an increase or decrease in
pressure, which may affect the sound quality. If required, open
the flaps to release the air.
5