Charging The Battery - Silvercrest SRR 3.7 B2 Instrucciones De Uso

Charging the battery

The battery should be charged for at least 60 minutes before first use.
NOTE
► Ensure that the appliance is switched off before charging the
battery.
1) Plug the connector
2) Plug the power plug
appliance specifications. While the battery is charging, the red
charge indicator light
♦ As soon as the battery is fully charged, the green power light
flashes. Disconnect the appliance from the mains voltage.
The green power light
♦ Once the battery is fully charged, you can use the appliance for
around 60 minutes without connecting it to the power supply.
♦ If the red indicator light
too low. Recharge the battery in that case.
SRR 3.7 B2
into the mains connection
into a socket that is compatible with the
lights up.
switches off.
flashes, the battery charge level is
on the shaver.
GB │ IE │
31 ■