Charging The Battery - Silvercrest SRR 3.7 B2 Instrucciones De Uso

Charging the battery

The battery should be charged for at least 60 minutes
before first use .
Ensure that the appliance is switched off before charging
the battery.
1) Plug the connector w into the voltage connection 0
on the shaver .
2) Plug the power plug q into a socket that is com-
patible with the appliance specifications . While the
battery is charging, the red charge indicator light 9
lights up .
As soon as the battery is fully charged, the green
♦
power light 8 flashes . Disconnect the appliance
from the power source .
The green power light 8 turns off .
Once the battery is fully charged, you can use the
♦
appliance for approximately 60 minutes without
connecting it to the power supply .
If the red indicator light 9 flashes, the battery
♦
charge level is too low . Recharge the battery case .
│
■ 14
US-EN
SRR 3.7 B2