Beretta POWER GREEN 50 Manual De Uso E Instalación página 11

Info list:
0
displays the wording InFO (Fig.17)
1
(only with an external probe connected) displays the
external temperature (e.g. 12°C) (Fig.18)
The values shown on the display range from -30°C to
35°C.
Beyond these values, the display will visualise "- -"
2 displays the system charge pressure (Fig.19)
3 displays the set heating temperature (Fig.20)
4 (only with storage tank with probe connected) displays
the set domestic water temperature (Fig.21)
5 (only with second circuit) displays the set heating tem-
perature on the second circuit
Fig.20
INf2 list
Step description
1 Delivery probe temperature
2 Return probe temperature
3 Domestic probe temperature: storage tank with thermostat (modes A and B)
4 Not used on this model
5 Flue gas probe temperature
6 Second heating system probe temperature
7 Not used on this model
8 Fan speed /100
9 Not used on this model
10 Not used on this model
11 Status of heat exchanger cleaning counter
12-19 Alarms log
Nb: (**) if the display also shows a point (.), the flue gas temperature is 100 + the value indicated
storage tank with probe (mode C)
Fig.17
Fig.18
Fig.19
Fig.21
2-figure
display
xx
xx
- -
xx
xx
xx (**)
xx
xx
xx
xx
xx
bH
xx
4-figure
display
01 °C
02 °C
03 °C
03 °C
Cond °C
05
06 °C
07
FAn
09
10
xxxx
HIS0 - HIS7
11