Alarm Set Off - Fermax kits EVOLUTION AVISA Manual Usuario

Kits EVOLUTION
Kits EVOLUTION
Monitor handset luminous indicators (LEDs).
These inform the user about:
LED (Colour)
Yellow
Green
NOTES:
To activate/deactivate the Do Not Disturb function, press the following keys combination: B#.
1
With the «Do Not Disturb» function activated, the monitor does not receive calls from the Outdoor Panel.
2 This function is only possible if an open door sensor has been installed in the Outdoor Panel (please consult your installer).
If this situation occurs, or the three LEDs on the handset stay lit at the same time, please contact your installer.
3
Message from Guard Unit
4 If there is a Fermax guard unit installed in the building, the concierge may advise a given user that there is a message for them.
«Message from Guard Unit» is visible on the monitor, indicated by a blinking «Yellow LED».
Press the lock release button to contact the guard unit (and disconnect the LED alert).
Status
Lit
Slow blinking
Fast blinking
Lit
Slow blinking
Fast blinking
Slow blinking
Red
Fast blinking
Meaning
Monitor in «Do Not Disturb» status
Message from guard unit
Do Not Disturb and message from guard unit
Door open (2)
Audio busy
Device in programming mode
General arming activated

Alarm set off

(1)
(4)
(3)
Pag 7