Kits EVOLUTION
Kits EVOLUTION
Fast Functions Guide
ALARM ZONES MANAGEMENT
ARM ZONES
DISARM ZONES
DEACTIVATE ACOUSTIC ALERT
Ends the acoustic alert .
The system is not disarmed, but keeps generating alarms if something
is detected by the sensors.
DEACTIVATE ACOUSTIC ALERT AND DISARM SYSTEM
The system is disarmed and the acoustic alert terminated.
To reactivate the alarms system, the system must be armed again.
MONITOR CONFIGURATION
CHANGE MASTER CODE
VOLUME LEVEL ''LOW''
VOLUMEN LEVEL ''HIGH''
AUXILIARY DEVICE ACTIVATION
MULTIFUNCTION
PANIC CALL
BUTTON
ALARMS RECEPTION CENTRE
RING TONE SELECTION
ALARM ZONES
STATUS
4 Zones Status
Zone 1 Status
Zone 2 Status
Zone 3 Status
Zone 4 Status
If the Zone is configured in «24 Hour Mode» the three LEDs (green, yellow and red) light up.
Pag 14
-
Door release button: Press the buton to select the ring tone from the Outdoor Panel.
Every time the button is pressed, you will hear a tune from those memorised in the monitor.
The final tune heard will be selected as the ring tone.
-
Auto-on button. Press the buton to select the ring tone from the Outdoor Panel.
1
Every time the button is pressed, you will hear a tune from those memorised in the monitor.
The final tune heard will be selected as the ring tone.
-
Multifunction button. Exit «Ring Tone Selection» mode.
F
KEY
SEQUENCE
0*
1*
2*
3*
4*
KEY SEQUENCE
Master Code + AA
Master Code + BB
Master Code + *#
Master Code + BB
Current Master Code + AB +
0 + New Master Code
Master Coder + AB + 6+0
Master Code + AB + 6+1
Master Code + AB + 7+0
Master Code + AB + 7+1
Master Coder + AB + 7+2
Master Code + AB + 8
ACOUSTIC
INFORMATION
+
+
+
+
EXAMPLE
1234AB04321
1234AB60
1234AB61
1234AB70
1234AB71
1234AB72
ZONE STATUS
Enabled
Disabled
Lit
2.5 sec.
LED ROJO
Lit
2.5 sec.
Lit
2.5 sec.
Lit
2.5 sec.
Lit
2.5 sec.
1234AA
1234BB
1234*#
1234BB
1234AB8
Off
Off
Off
Off
Off