Kits EVOLUTION
Kits EVOLUTION
Monitor Description
Lock release button/
Call guard unit
Auto-on button
15-key keypad
(0 .. 9, *, #, A, B, C)
Multifunction button
Yellow LED
Green LED
Red LED
Monitor handset front buttons:
-
Lock release button / Call guard unit.
- When talking to the Outdoor Panel, press this button to activate the electric lock.
- With the handset hung up, press this button to make a call to the guard unit (if there is one).
-
Auto-on button. Press the button to activate the monitor manually and set up communication
1
(audio and video) with the outdoor panel.
-
Multifunction button. The function of this button can be selected fom 3 possible functions:
F
*
*
*
- C : The C key (Clear) erases the sequence entered and resets the keypad. The keypad has an 8-second
time-out , which means that after 8 seconds with no activity the keypad is reset.
Additional functions:
With the monitor off, press the following keys:
- N #, (where N is the guard unit number): Call guard unit (0..9) (if there are any).
- A #: Call lift. (Depends on the installation. Please consult your installer).
- B #: Do Not Disturb
If the «Do Not Disturb» function is activated, the monitor's yellow LED comes on.
NOTES:
With the «Do Not Disturb» function activated and the monitor on (ON/OFF switch in the on position), when a call is made from
1
the outdoor panel or the guard unit, the call will not be heard, but there will be video (in panel calls).
If you wish to disconnect the video, you must place the ON/OFF switch in off position.
If you disconnect the video and the «Do Not Disturb» function is deactivated, the call will sound in the monitor but there will be no
video.
Pag 6
1
2
4
5
7
8
*
0
A
B
Brightness
control
Activation of an auxiliary device (if installed, please consult your installer).
Panic Call. Send a panic alert (emergency call) to a panic guard unit (if there is one).
Connection to an Alarms Reception Centre.
. The monitor does not answer calls from the Outdoor Panel.
(1)
F E R M A X
1
3
F
6
9
#
C
Colour control
Contrast control
Screen
Contrast control
(only in Colour monitors)
ON/OFF Switch
(Colour Monitor)
(B/WMonitor)