Operation - Stihl RE 90 Manual De Instrucciones

4 Safety Precautions
WARNING
￭ Parts that are not in a safe condition cannot function
properly and safety devices can be disabled. People can
be seriously injured or killed.
► Never use a damaged pressure washer.
► Never use a damaged high-pressure hose, couplings or
spray attachment.
► Attach the high-pressure hose, couplings and spray
attachment as described in this Instruction Manual.
► Never use a damaged connecting cord, extension cord
or mains plug.
► If the pressure washer is dirty or wet: clean the pressure
washer and allow it to dry.
► If the spray attachment is dirty: Clean the spray
attachment.
► Do not modify the pressure washer.
► If the controls do not work: Do not operate the pressure
washer.
► Only fit original STIHL accessories for this pressure
washer.
► Fit the accessories as described in this Instruction
Manual or in the Instruction Manual for the accessory.
► Do not insert objects into the openings in the pressure
washer.
► If in any doubt: Contact a STIHL servicing dealer.
4.7

Operation

WARNING
￭ In certain situations the user may no longer be able to
concentrate on the job. The user may trip, fall and be
seriously injured.
► Keep calm and plan your work.
► In poor light conditions and poor visibility: Do not
operate the pressure washer.
► Use the pressure washer on your own.
0458-814-8721-A
► Watch out for obstacles.
► Stand safely on the ground when operating the pressure
washer and keep your balance. If you have to work at a
height: use a lift bucket or secure scaffolding.
► If you experience signs of fatigue: Take a break.
￭ If the pressure washer starts behaving differently or in an
unusual way while operating, the pressure washer may be
in an unsafe condition. This can result in serious injuries
and damage to property.
► Stop working, unplug the mains plug from the socket
and consult a STIHL servicing dealer.
► The pressure washer must always be operated in an
upright position.
► To ensure an adequate exchange of cooling air, do not
cover the pressure washer.
￭ When the spray gun trigger is released, the high-pressure
pump switches off automatically and water stops flowing
out of the nozzle. The pressure washer is then in stand-by
mode and is still switched on. If the spray gun trigger is
squeezed, the high-pressure pump switches on again
automatically and water flows out of the nozzle. This can
result in serious injuries and damage to property.
► When not operating the machine: Lock the spray gun
trigger.
► Switch off pressure washer.
► Unplug the mains plug of the pressure washer from the
socket.
English
43