Starting And Stopping; Before Starting - Husqvarna LM 2247C Manual De Instrucciones

Starting and stopping

Before starting

WARNING! Please read the operator's
!
manual carefully and make sure you
understand the instructions before using
the machine.
Wear personal protective equipment. See
instructions under the "Personal
protective equipment" heading.
• Keep people and animals well away from the working
area.
• Perform daily maintenance. See instructions in the
section "Maintenance".
• Ensure the ignition lead sits correctly on the spark
plug.
Starting
Manual Start (LM 2247C, LM 2247CD)
Models LM 2247C, LM 2247CD have manual choke
(primer diaphragm). If the lawn mower is being started for
the first time press on the fuel pump five times. After that
you should press on the fuel pump three times when
starting a cold engine.
• The engine brake handle must be held against the
handlebar when the engine is started.
• Position yourself behind the machine.
• Grip the starter handle, slowly pull out the cord with
your right hand until you feel some resistance (the
76 – English
OPERATING
starter pawls grip). Pull with force to start the engine.
Never twist the starter cord around your hand.
Drive (LM 2247CD, LM 2247CDP)
• Push the propulsion bar in towards the handle in order
to start the drive.
• Before pulling the machine towards you, disengage
the drive and push the machine forward approx. 10
cm.
Stopping
• Stop the engine by releasing the engine brake handle.