TFA Dostmann 30.3030.IT Manual De Instrucciones página 38

5. Press the MIN/MAX/+ to return to current indoor and outdoor temperature
display.
RESETTING THE MIN/ MAX TEMPERATURE
Note: All the indoor and outdoor MIN/MAX records will the reset at the same
time.
1. Press the MIN/MAX/+ key once to enter the indoor temperature display.
2. Press the SET key. This will reset both the MIN/MAX indoor and outdoor
temperature data to the current temperature data.
OUTDOOR TRANSMITTER
The outdoor temperature is measured and transmitted every 4 seconds.
The range of the temperature transmitter may be affected by the temperature. At
cold temperatures the transmitting distance may be decreased. Please bear this in
mind when placing the transmitter.
868 MHz RECEPTION:
The temperature station should receive the temperature data within 2 minutes after
set-up. If the temperature data is not received 2 minutes after setting up (the outdoor
display shows "- - -", please check the following points:
1. The distance of the temperature station or transmitter should be at least 1.5
to 2 meters away from any interfering sources such as computer monitors or
TV sets.
2. Avoid placing the receiver onto or in the immediate proximity of metal window
frames.
3. Using other electrical products such as headphones or speakers operating
on the same signal frequency (868MHz) may prevent correct signal
transmission and reception.
37