Manual Time Setting - TFA Dostmann 30.3030.IT Manual De Instrucciones

MANUAL SETTING
The following manual settings can be done in the setting mode:

Manual time

Calendar

12/24 hour time display

Time zone

Time reception ON/OFF (DCF ON/OFF)

Temperature unit °C/°F setting
Press and hold the SET key for about 3 seconds to advance to the setting mode:

MANUAL TIME SETTING

In case the temperature station is not able to detect the DCF-signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as
a normal Quartz clock.
Hours (flashing)
1. The hour digit in the time section starts flashing. Use the MIN/MAX/+ key to
set the hour.
2. Press the SET key to enter the minutes. The minute digits start flashing.
3. Use the MIN/MAX/+ key to set the minute.
4. Press again the SET key to confirm and enter the Calendar setting mode.
Minutes (flashing)
32