How To Cope With The Needle Bar Down When The Machine Makes A Down Position Stop - JUKI SC-922 Manual De Instrucciones

12. HOW TO COPE WITH THE NEEDLE BAR DOWN WHEN THE MA-
CHINE MAKES A DOWN POSITION STOP
If the needle bar lowers when the machine made a down position stop, make the settings of the following
functions.
Function No.58
Needle bar normal position
retaining function
[How to make the setting]
1) Refer to "1. Setting of the mounted head, 1) How to enter into the function setting mode", and enter into
the function setting mode.
switch ❸ or
2) Press
switch ❺ or
3) Press
switch ❸ or
4) Press
Needle bar vertical normal position retaining function
0 : Needle bar normal position retaining function disabled
1 : Needle bar normal position retaining force – weak
2 : Needle bar normal position retaining force – medium
3 : Needle bar normal position retaining force – strong
❶
❷ ❸ ❹
switch ❹ to call out function setting No. 58.
switch ❻ and select the function.
switch ❹ and return to the function setting mode.
– 19 –
Functions
❺ ❻ ❼