Timing To Release The Needle Thread Tension; Adjusting The Take-Up Thread Tension Control Lever; Position Of The Intermediate Thread Tension Releasing Lever And Thread Guide Of The Needle Thread Tension Controller - JUKI MS-1261/V045 Manual De Instrucciones

14. TIMING TO RELEASE THE NEEDLE THREAD TENSION

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
7mm

15. ADJUSTING THE TAKE-UP THREAD TENSION CONTROL LEVER

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
16. POSITION OF THE INTERMEDIATE THREAD TENSION RELEASING LEVER
AND THREAD GUIDE OF THE NEEDLE THREAD TENSION CONTROLLER
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
3mm
[ MS-1261/V045 ]
MS-1261/V046
0mm
[ ]
MS-1261M/V045
MS-1261M/V046
– 8 –
(0 mm for MS-1261M/V045, MS-1261M/V046)