Descargar Imprimir esta página

AEG PNEUMATIC 5000 E Instrucciones De Uso página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Function of
rotary pneumatic
hammer
Brief description
Hammer drilling chuck for
bits and accessories with
SDS-max reception – tools
are locked automatically after
insertion.
Selector lever for switching
between hammer drilling and
chiselling.
Auxiliary handle, has an
integral depth gauge and can
be rotated in various
positions.
Built-in safety clutch helps prevent
the machine from rotating if the drill bit
jams.
Switching the
machine on and
off
ENGLISH
The impact needed for hammer drilling in stone is created by a pneumatic hammer
striking mechanism. Similar to hitting a common chisel with a hammer, a plunger hits
the axially moving chisel. The electric motor moves the plunger back and forth crank
drive –> piston –> freely moving piston. There is a pneumatic cushion between
piston and freely moving piston (pneumatic hammer mechanism). This results in a
highly effective hammering action.
Exerting greater power does not increase the machine's effectiveness.
Anti Vibration System AVS
The hammer mechanism and motor are
independant of the handgrips, cushioning
elements absorb vibrations on both handgrips
when hammering and chiselling.
Modifications: Text, diagrams and data are correct at the time of printing. In the interest of continuous
improvement of our products, technical specifications are subject to alteration without prior notice.
Switching on: Press switch trigger
Switching off: Release switch trigger
The speed can be infinitely varied by
slowly releasing/pressing the switch
trigger.
2
Reception for auxiliary handle at the side
of the machine. For drilling upward or
downward the auxiliary handle can be
fastened at the side of the machine.
Switch trigger for switching the machine on and off, and
for smooth starting and varying speed.
Ergonomically designed
housing with soft grip.
PNEUMATIC 5000 E

Publicidad

loading