Utilization Of The Osciloscopio; Operation Shortcuts; Configure The System - Promax OD-590 Manual De Usario

USER'S MANUAL. OD-590/91/92
4. UTILIZATION OF THE OSCILLOSCOPE

4.1 Operation Shortcuts

Here is the list of operations and their key shortcuts introduced in this
manual.
SYMBOLS DESCRIPTION
Display→F1:
F1 :
F1~F4:

CONFIGURE THE SYSTEM

Acquisition
Select the Acquisition mode:
Select the memory length:
Cursor
Select the horizontal cursor:
Select the vertical cursor:
Display
Freeze the waveform:
Refresh the display view:
Select the display grid:
Switch the vectors/dots waveform:
Set the display contrast:
Turn Off the display menu:
View accumulated waveform:
Page 23
Press the Display key, then press F1
Press F1 repeatedly, if necessary.
Use all F1, F2, F3, and F4 to complete the operation
→
Acquire F1~F4
→
Acquire F5
→
Cursor F1~F2
→
Cursor F1, F3
Run/Stop
Display→F3
Display→F5
Display→F1
Display→F4
Menu ON/OFF
Display→F2
01-2007