Promax OD-590 Manual De Usario página 226

Display the recalled waveform
Display
Save/Recall
Refs.
1. Press the Save/Recall key→F5→F3 (setup)/ F4 (waveform).
2. To select the source, press F2 repeatedly.
3. To select the memory location, use the Variable knob.
4. (Recalling from USB flash drive) Connect the flash drive to the front
or the rear USB connector.
Note: USB rear panel host and rear panel slave connection cannot be
used at the same time.
Front Panel USB
5. (Recalling
waveform), press F3 repeatedly.
6. To recall waveform/setup, press F4.
7. To configure USB drive folders.
8. (Showing the recalled waveform) Press Save/Recall key→F2. To
show the waveform, select among F2~F4 and press it.
01-2007
F 2
(4CH only)
(4CH only)
CH1
waveforms) To
USER'S MANUAL. OD-590/91/92
Display
F 1
Refs.
F 2
Ref A
F 3
Ref B
Ref C
F 4
Ref D
F 5
Rear Panel USB
GO / NO GO
(Open collector)
select the destination
On/ Off
On/ Off
On/ Off
On/ Off
RS232
(reference
Page 100