General Informations; Technical Data; Symbols - Ryobi ECS 1940 Manual De Instrucciones

Before using your power tool read carefully the manual instructions
1. G
ENERAL INFORMATIONS
Dear client, may we congratulate you for
having chosen one of our products for your
garden. The chainsaw has been manufac-
tured in accordance with the current safety
regulations which protect the consumer.
This manual describes and illustrates the
various operations for assembly, use and
maintenance which are required in order to
keep your chain saw in perfect condition.
T
O FACILITATE READING
The illustrations about the assembly are to
be found on the back of cover, at the begin-
ning of this booklet. Keep this pages open
while reading the assembly instructions.
Should your chainsaw need servicing or
repair, please contact your retailer or an au-
thorised service centre.
2. T
ECHNICAL DATA
Model
Voltage - Power
Power frequency
Electrical engine no load speed
Bar length
Weigth
L (Sounding pressure)*
pA
L (Sounding power)
WA
Vibration level
front handle
rear handle
* to ears of operator
6
ECS 1940
V 230 - W 1900
Hz 50
rpm 5800
cm 40
Kg 5,65
dB(A ) 95,5
dB(A) 106
2
m/s 4,0
2
m/s 7,3
3. S
YMBOLS
The following symbols are used throughout
this manual. Before read it they must be
known.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non observance of the in-
struction in this manual
Denotes risk of electric shock
Use always: safety helmet, noise-
damping earplugs, protective
gagglers or visor
Use always sturdy shoes not slid-
ing
Use always protective gloves
Read the instruction manual.
Do not expose to rain.
Remove plug from the mains im-
mediately if cable is damaged or
cut.
Hold the chain saw with both
hands.
Suggested way of operating.
Danger of kickback.
Maximum guide bar length
utilizable.
Cleaning
N
Shows the picture linked with the
manual's text
Discarded electrical appliances
contain recyclable materials and
should therefore not be disposed
of along with household waste.