Mounting The Devices; Mounting The Transmitter - Silvercrest WD1610 Manual Del Usuario

Mounting the Devices

The package includes all necessary material
for mounting both devices. Alternatively you
may simply leave the receiver for stand-up
installation.

Mounting the Transmitter

Look for a suitable place where you want to
mount the transmitter.
Open the transmitter housing by inserting a
-
flat screwdriver into the notch on the
housing side. Carefully push the nose latch
(8) inwards. You can then remove the upper
housing piece.
Wireless Door Bell WD1610
Make sure that the distance between
transmitter and receive does not
exceed the maximum range. If
necessary, test their proper
functionality prior to mounting the
devices in their position.
English - 87