Scope Of Delivery - Waeco MagicTouch MT350 Instrucciones De Montaje

MagicTouch MT350
Observe the following installation instructions:
Secure the MagicTouch components installed in the vehicle in such a way that
they cannot become loose under any circumstances (sudden braking, acci-
dents) and cause injuries to the occupants of the vehicle.
To prevent damage when drilling, make sure there is sufficient space on the
other side for the drill head to come out (fig. 5, page 5).
Deburr all drill holes and treat them with a rust-protection agent.
Observe the following instructions when working with electrical parts:
When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 8, page 3) or a voltmeter (fig. 1 9, page 3).
Test lamps with an illuminant (fig. 1 12, page 3) consume currents that are ex-
cessive and can damage the vehicle's electronic system.
When making electrical connections, ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid through sharp-edged ducts without protection (fig. 6,
page 5)
Insulate all connections.
Protect the cables from mechanical wear (for example rubbing against existing
cables) using cable binders or insulating tape.
3

Scope of delivery

No. in Quanti
fig. 2, page 4
1
2
–
–
–
–
–
–
–
Description
ty
1 Radio receiver
2 Hand transmitter
1 Cable for receiver unit
1 Operating current relay
1 Fuse element, 15 A
1 m Red cable
0.5 m Black cable
4 Cable terminals for connecting to the
operating current relay
– Fastening material
Scope of delivery
Item number
MT-350RX
MT-350TX
MT-350KA
45