Section
02
Operating this unit
iPod
Basic Operations
Playing songs on iPod
1 Open the USB connector cover.
2 Plug in an iPod using an iPod Dock Connector to
USB Cable.
Selecting a track (chapter)
1 Push M.C. left or right.
Fast forwarding or reversing
1 Push and hold M.C. left or right.
Notes
! The iPod's battery will be charged if the igni-
tion switch is set to ACC or ON, while con-
nected.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off unless the
control mode is set to iPod.
! Disconnect headphones from the iPod before
connecting to this unit.
! The iPod will turn off about two minutes after
the ignition switch is set to OFF.
Displaying text information
Selecting the desired text information
1 Press
/DISP/SCRL.
Play time—song title—artist name—album title
—number of songs
Scrolling the text information to the left
1 Press and hold
Note
Incompatible text saved on the iPod will not be
displayed by the unit.
Browsing for a song
1
Press
to switch to the top menu of
the list search.
12
En
/DISP/SCRL.
2
Use M.C. to select a category/song.
Changing the name of song or category
1 Turn M.C.
Playlists—artists—albums—songs—podcasts—
genres—composers—audiobooks
Playing
1 When a song is selected, press M.C.
Seeing a list of songs in the selected category
1 When a category is selected, press M.C.
Playing a song in the selected category
1 When a category is selected, press and hold M.C.
Searching by alphabet in the list
1 When a list for the selected category is displayed,
press
to switch to alphabet search mode.
2 Turn M.C. to select a letter.
3 Press M.C. to display the alphabetical list.
If alphabet search is aborted, NOT FOUND is dis-
played.
Note
Depending on the number of files in the iPod,
there may be a delay when displaying a list.