Graco SLIMFIT Manual De Instructiones página 14

3-B Install Rear-Facing With LATCH Strap
Review your vehicle's owner manual for LATCH location and use.
1. Make Sure LATCH Strap is in the
Rear-Facing Belt Path, Marked
With a Blue Label
If it is not, see section 7-A to move
LATCH strap.
2. Recline the Car Seat
Place the car seat in recline position 1 or
2.
3. Remove LATCH Connectors from
Storage Location
Push in on the red buttons on the LATCH
connectors and remove from storage
location.
4. Extend the LATCH Strap.
For easier installation, extend the LATCH
strap to its maximum length by pressing
the gray button and pulling on the strap.
14