Graco SLIMFIT Manual De Instructiones página 24

4-C Install Forward-Facing With Vehicle
Seat Belt
1. Recline the Car Seat
Place the car seat in recline position 3 or 4.
2. Store LATCH Connectors
Push in on the red buttons and attach
the LATCH connectors to plastic bar as
shown and remove the slack from the
strap.
3. Place Car Seat Forward-Facing in
Back Seat of the Vehicle
Place the base flat on the vehicle seat.
Push it back firmly until the back of the
car seat touches the vehicle seat back.
Center the car seat between the lower
LATCH anchors.
4. Unhook Top Tether Strap From
Storage Location and Lay it in the
Seat
24