Graco SLIMFIT Manual De Instructiones página 22

4. Extend the LATCH Strap
For easier installation, extend the LATCH
strap to its maximum length by pressing
the gray button and pulling out on the
strap.
5. Place Car Seat Forward-Facing in
Back Seat of the Vehicle
Place the base flat on the vehicle seat.
Push it back firmly until the back of the
car seat touches the vehicle seat back.
Center the car seat between the lower
LATCH anchors.
6. Connect LATCH Connectors to
Vehicle's Lower LATCH Anchors.
LATCH strap should lay as flat as possible
and not be twisted.
7. Tighten the LATCH Strap
Press down firmly in the center of the car
seat while tightening the LATCH strap.
22