Graco SLIMFIT Manual De Instructiones página 48

Ocultar thumbs Ver también para SLIMFIT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The following types of vehicle seat belts CANNOT be used safely with this car seat:
Lap Belt with Motorized
Shoulder Belt
Lap/Shoulder Seat Belt Installation - Harness Mode
Always review your vehicle owner's manual for specific information about your vehicle
seat belts.
There are three types of retractors: ELR (Emergency Locking Retractor), ALR
(Automatic Locking Retractor) , and Switchable (ELR switch to ALR). To
determine your type of retractor, follow these steps:
1. Slowly pull the belt out about halfway and stop.
2. Let the belt retract back several inches.
3. Try to slowly pull the belt out more. If the belt cannot be pulled
any further, it is ALR. If it can be pulled further, go to the next step.
4. Slowly pull the belt all the way out, and then allow it
to retract several inches.
5. Try to pull the belt all the way out again. If it cannot be pulled
out, it is
Switchable. If it can still be pulled out freely, it is ELR.
Note: Most vehicles manufactured after 1996 will have Switchable retractors in the
back seat. If you have any questions about your retractor type, consult your vehicle
owner's manual or call Graco for assistance.
Lap Belt or Shoulder
Belt Mounted on Door
48
Belts Forward of the
Seat Crease

Publicidad

Tabla de contenido
loading

Tabla de contenido