• The hood canopy must be levelled.
• The Hood is levelled by adjusting the
safety pawls C.
• Rest a spirit level on the hood.
• Exerting an upwards pressure on the safety knobs
"unlocks" movement of the Cable. By inserting or
extracting the cable from the cable locking screw
it is possible to make adjustments to level the
mobile hood canopy.
• Once the hood has been set level, the safety knobs
must be tightened.
Warning:
• Make sure that all 4 of the support cables are taut.
• Make sure that none of the 4 support cables have been damaged during installation.
• Remember that there must be a minimum distance of 650mm between the Hood and the cooker
hob and the maximum extension of movement must not exceed 645mm.
EN
LEVELLING THE HOOD
1
15
5