Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Additional information for the installation technician
A
Intervention procedure in the event of problems with the movement
1.
Check that the fuse is properly inserted and has not burnt out; to replace it if
necessary open the lighting unit, remove the Grease filter and unscrew the fuse
holder visible to the left of the motor unit, replacing the fuse with another of
the same type (Ref. A).
2.
Check that the hood canopy is fitted level (the use of a spirit level is
recommended).
3.
Check that the four cables are all at the same tension.
If the above operations do not solve the problem, contact the Technical Service
EN
Department.
2
22
2
Publicidad
Tabla de contenido
