OHAUS Pioneer Manual De Instrucciones página 24

Ensure the balance has been leveled and calibrated.
The PX balance is equipped with a weigh below hook for weighing below the balance (as shown in the figure
below).
Before turning the balance over, remove the pan and draft shield elements (if present) to prevent damage. Do not
place the balance on the pan support cone or load cell pins.
To use this feature, remove power from the balance, then remove the protective cover for the weigh below
opening.
Power on the balance, and then use a string or wire to attach items to be weighed.
GlobalScientificSupply
www.
Weigh Below
protective cover
GLOBAL SCIENTIFIC SUPPLY
.com
The Laboratory Supply Company!
Weigh Below hook
info@GlobalScientificSupply.com