OHAUS Pioneer Manual De Instrucciones página 28

Continue to follow the instructions on the display until the calibration is completed.
1. Press and hold the
Calibration Menu will display.
2. Press
calibration mode, press
calibration) is displayed.
3. Press
4. Calibration masses value will be shown in the screen.
After the display shows "Place weights" and "50.0000 g",
place weight(s) of 50 g on the pan for calibration.
5. Remove the weight(s) of 50 g from the pan. After a while,
"100.0000 g" will be displayed on the screen. Please
place weight(s) of 100 g on the pan for calibration.
GlobalScientificSupply
www.
to enter the Calibration Menu. To change the
o until Linearity Cal (linearity
to begin the linearity calibration.
.com
button, and the
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
info@GlobalScientificSupply.com