Percent Weighing - OHAUS Pioneer Manual De Instrucciones

Improving counting accuracy by re-calculating the piece weight
automatically as parts are added.
APW Optimization occurs only when the number of pieces
added to the pan is between one and three times the number
already on the pan.
Changing printing setup. See Section 7 for more information.
Before using any application, be sure the balance has been leveled and calibrated.
Use Percent Weighing to display the weight of a test object as a percentage of a pre-established reference
sample.
The default (or last) reference weight is displayed.
1. Press and hold the
Percent Weighing appears.
2. After confirmation by pressing
"Clear reference?" will appear on the screen.
3. Press
display.
4. Place the reference sample on the pan to display the
weight. When the reading is stable, the * will appear.
5. Press the
of the reference sample is stored in memory. The
display will show 100%.
GlobalScientificSupply
www.
, the message
, and then the message "Place sample" will
button so that the weight
.com
button until
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
info@GlobalScientificSupply.com