Changing The Batteries; Technical Data - Seca 872 Manual De Instrucciones

7. Servicing
Your seca scale leaves the factory with an accuracy greater than ± 0.15 %. To ensure that
this degree of accuracy is maintained, the product must be carefully set up and regularly
serviced. Depending on frequency of use, we recommend servicing at intervals of 3 to 5
years. Please note that a qualified servicing agent should be used for this. If you are in doubt,
seca Customer Service will give you more information.

Changing the batteries

When or
bAtt
four type AA 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Press the closure of the battery compart-
ment in the direction of "OPEN" and open
the cover.
– Remove the used batteries and insert new
batteries.
Check that the polarity is correct.
– Close the cover.
– Then turn the scale back up the right way.

8. Technical data

Maximum capacity
Graduations
0 to 50 kg/100 lbs
50 kg/100 lbs to 200 kg/440 lbs
Accuracy
Size of digits
Dimensions
Width:
Height:
Depth:
Weight
Temperature range
Model 872
appear in the display, you should change the batteries. You need
200 kg/440 lbs
0.05 kg/2 oz
0.1 kg/4 oz
greater than ± 0.15 %
16 mm
295 mm
53 mm
300 mm
approx. 3.6 kg
+10 °C to +40 °C
15
GB