Changing The Batteries - Seca 799 Manual De Instrucciones Y Garantía

E
... the display and XX.XX appear?
– Switch off the scale with the Start key and start the scale again. The scale will then
work normally again.
If this is not the case, disconnect the power supply by briefly removing the batteries or
unplugging the mains supply from the scale. If this measure is equally unsuccessful,
inform the Service department.
8. Servicing/verification
Have the scale verified by authorised persons in accordance with national legal require-
ments. Verification is essential if one or more security marks are damaged.
We recommend having your scale serviced by your local service agent before having it
verified. seca Customer Service will be pleased to give you further assistance.

Changing the batteries

bAtt
When or
6 type AA 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Push the battery compartment closure
towards "Battery" and open the cover.
– Take out the holder and batteries.
– Remove the used batteries and insert
new batteries in the holder.
Check that the polarity is correct.
– Place the holder and batteries in the
battery compartment.
– Close the cover.
– Then turn the scale back up the right
way.
26
appear in the display, you should change the batteries. You need