Manufacturer's Warranty - Hilti VC 20-U-Y Manual De Instrucciones

Disposing of drilling slurry
Disposing of drilling slurry directly into rivers, lakes or the sewerage system without suitable
pretreatment presents environmental problems. Ask the local public authorities for information
about current regulations. We recommend the following pretreatment:
1. Collect the drilling slurry (for example, using a wet-type vacuum cleaner).
2. Allow the drilling slurry to settle and dispose of the solid material at a construction waste
disposal site (the addition of a flocculent may accelerate the separation process).
en
3. The remaining water (alkaline, pH value greater than 7) must be neutralized by the addition of
an acidic neutralizing agent or diluted with a large volume of water before it is allowed to flow
into the sewerage system.
Disposal of drilling dust
The drilling dust collected must be disposed of in accordance with the applicable national
regulations.

11 Manufacturer's warranty

Hilti warrants that the tool supplied is free of
defects in material and workmanship. This war-
ranty is valid so long as the tool is operated and
handled correctly, cleaned and serviced prop-
erly and in accordance with the Hilti Operating
Instructions, and the technical system is main-
tained. This means that only original Hilti con-
sumables, components and spare parts may
be used in the tool.
This warranty provides the free-of-charge re-
pair or replacement of defective parts only over
the entire lifespan of the tool. Parts requiring
repair or replacement as a result of normal wear
and tear are not covered by this warranty.
48
Additional claims are excluded, unless strin-
gent national rules prohibit such exclusion.
In particular, Hilti is not obligated for direct,
indirect, incidental or consequential dam-
ages, losses or expenses in connection with,
or by reason of, the use of, or inability to use
the tool for any purpose. Implied warranties
of merchantability or fitness for a particular
purpose are specifically excluded.
For repair or replacement, send the tool or
related parts immediately upon discovery of
the defect to the address of the local Hilti
marketing organization provided.
This constitutes Hilti's entire obligation with
regard to warranty and supersedes all prior
or contemporaneous comments and oral or
written agreements concerning warranties.