DISPLAY
Overdrive (2h)
Behavioural indicator
Instantaneous power
indicator
point
4.1 ON/STANDBY MODE
In "Standby" mode the LCD displays the
Standby icon , the hour and day of the week.
All the operating modes are suspended ("Pilot
Wire" included), but the appliance is powered
and waiting for command reception.
To turn on or off the appliance, press the "Stand-
by" key. The towel warmer turns on in the pre-
viously selected operating mode and emits a
beep.
In "Chrono" mode the display shows the time,
in the other modes the temperature setting is
displayed.
The entry into "Standby" mode is signalled by
means of a double beep, the exit from "Stand-
by" mode by means of a long beep.
4.2 OPERATING MODES
The appliance provides 6 operating modes which allow the
user to heat the environment in the most suitable way with
respect to his needs.
Operating
Open
modes
Window
Children
Holiday
Keypad Lock
Safety
Chrono temperature Set
Press the "Mode" selection key to select the
desired operating mode. An icon on the LCD
will show the selected operating mode.
Pilot Wire
Chrono
PILOT WIRE
The temperature depends on the "Pilot Wire"
command.
All "Pilot Wire" commands are enabled.
COMFORT
The "Comfort" temperature corresponds to the
temperature desired by the user.
All "Pilot Wire" commands are disabled.
NIGHT/ECO
perature with a reduced energy consumption.
All "Pilot Wire" commands are disabled.
17
Chrono presets
Heating element state
Standby Mode
Days of the Week
Chrono program
time bar
Comfort
Anti-Freeze
Energy Saving
-
GB