DeLonghi DOLCE VITA ELETTRICO Manual De Instrucciones Para El Uso página 24

4.5 INSTANTANEOUS POWER INDICATOR
This graphic provides an immediate indication of appliance
power use (each sector represents 20% of the power).
GB
IMPORTANT: In case of power down due to a black-out, all
current settings are kept in memory with the exception of
date and time.
If the power black-out occurs in "Chrono" mode, when power
is restored, the appliance resumes functioning in "Energy
Saving" mode.
IMPORTANT: If the appliance remains without power while
the "Overdrive (2h)" function is enabled, the date and time
settings are lost. When power is restored, the appliance
exits the function and resumes functioning in the mode se-
lected previously.
IMPORTANT: In case of power down while the "Holiday"
function is enabled, when restored, the function remains
active and the countdown of days to the end of the holiday
resumes from the moment of its stop.
IMPORTANT: In case of power down while the "ASC" func-
tion is enabled, when restored, the function remains active
but a few days will be required for it to become fully opera-
tional.
7. TROUBLESHOOTING
The appliance does not heat
up.
The appliance heats
continuously.
Check if the appliance is correctly connected to the mains power grid and powered.
Check the position of the mains switch of the installation.
Increase the temperature set point on the appliance regulator.
Make sure there are no garments covering the control device or temperature sensor.
Disconnect the appliance from the household mains for a few minutes to reset the elec-
tronic system.
Reduce the temperature set point on the appliance regulator.
Make sure the "Overdrive (2h)" function has not been activated accidentally.
Make sure there are no garments covering the control device or temperature sensor.
> TROUBLESHOOTING continued on next page
22
5. CLEANING
Before cleaning, make sure the appliance is turned
off, cold and disconnected from the household
mains.
To clean, just wipe with a soft damp cloth and
neutral detergent. Never use abrasive or corrosive
cleaning products or solvents.
surface and inside of the appliance at least twice a
year using a vacuum cleaner.
6. MAINTENANCE
Should any technical problems arise, contact a
the dealer or manufacturer) or your local dealer.
All operations on the appliance must be carried out
maintenance must make sure the appliance
is turned off, cold and disconnected from the
household mains.
The appliance contains a precise quantity of
professional.