4.2.6 ENERGY SAVING
reduces energy consumption when the room is left unused
GB
but a comfortable temperature needs to be maintained.
To activate "Energy Saving", press the "Mode"
key until the "E S" symbol is displayed in place
4.3 FUNCTIONS
The appliance has a number of special functions to customise
and optimise use.
4.3.1 ASC
This function measures the thermal inertia of the room to
reach the set temperature and switches the appliance on
in advance to ensure that the "Comfort" temperature is
reached by the set time.
The function can switch the appliance on up to 2 hours early.
This function can be activated and operates only in
"Chrono" mode. (See Ch. 4.2.5.)
A number of days of data acquisition are required
to optimise the accuracy of the ASC function.
4.3.2 OPEN WINDOW
The "Open Window" function automatically detects an open
window in the proximity of the towel warmer (for example
during housework) and it goes into "Anti-Freeze mode", in
order to prevent unnecessary heating and to save energy.
The function can also detect the closing of a window and
reset the previous operating condition.
When switching the appliance on, the function is already ac-
tive, ready to detect any open windows.
To activate or deactivate the function, press
the
appears or disappears from the display.
When an open window is detected, the "Open
Now pressing the
Window" action until detection of the next
open window.
key and hold it down until the
key cancels the "Open
For the optimal operation of the function, it is recommended
to install the appliance near a window (Fig. 9).
Fig. 9
SUGGESTED AREA
The appliance's reaction to windows opening and
closing depends on many factors, such as the tem-
perature set on the appliance, external tempera-
ture, the degree of ventilation inside the room, the
towel warmer's position and the presence of other
heating sources.
The "Open Window" function cannot be activated
or deactivated in "Standby" mode.
If the appliance has detected an open window,
all the operating modes and the "Overdrive (2h)"
function can be selected, however they will not be
active until the window is detected as closed or the
"Open Window" function is cancelled. The "Chil-
dren Safety" and "Keypad Lock" functions remain
active and can be activated and deactivated even
when the appliance has detected an open window.
4.3.3 CHILDREN SAFETY
When the "Children Safety" function is activated, the
surface temperature of the appliance is lower than in normal
avoid the risk of burns caused by brief accidental contact.
To activate the function, press the "+" and "-"
keys together and hold them both down until
the icon
To deactivate the function, repeat the same
icon
operation.
"Children Safety" can be activated in all operating modes,
including "Overdrive (2h)". The function cannot be activated
when the appliance is in "Standby".
IMPORTANT:
When this function is active, the appliance heats at reduced
power and therefore the room takes longer to warm up.
20
appears on the display.