Temperature Selection; Cleaning The Appliance; Power Failure; Error Codes - Jocel JCV-477L Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions

TEMPERATURE SELECTION

Setting Temperature:
The temperature of the freezer compartment is controlled by adjusting / setting the thermostat control panel. Press
the arrow keys (▲ and ▼) to set / adjust the temperature. When the temperature icon is fl ashing, you can set the
temperature between -14°C to -24°C, the recommended temperature setting is -18°C . The setting will take
approximately 5 seconds to take effect. After approximately 5 seconds the temperature icon will display the current
actual temperature. The default temperature setting is -18°C.
Setting Fast Freeze Function:
• The Fast Freeze function allows the unit to run until it reaches -26°C or until the compressor runs continuously
for 24 hours, whichever comes fi rst. Press and hold the Fast Freeze key for 3 seconds to engage Fast Freeze mode,
the corresponding LED turns on, the temperature icon will display -26 and fl ash. After approximately 5 seconds the
temperature icon will display the current temperature. To cancel the Fast Freeze function, press and hold the Fast
Freeze key for 3 seconds to exit, the Fast Freeze function has now been cancelled, and the LED will turn off. Once
the Fast Freeze function ends or is cancelled, the unit will revert to the last set temperature.
Switching Between °C and °F:
To switch between °C and °F, press the °C/°F key, the corresponding indicator light will illuminate.
Care and Maintenance

CLEANING THE APPLIANCE

Unplug the unit and remove the food and interior accessories.
Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.
Wash the baskets and interior accessories with a mild detergent solution.
The outside of the unit should be cleaned with mild detergent and warm water.
Caution: Failure to unplug the appliance could result in electrical shock or personal injury.

POWER FAILURE

Most power failures are corrected within a few hours and should not affect the temperature of your freezer
you minimize the number of times the door is opened. If the power is going to be off for a longer period of time,
you need to take the proper steps to protect your food.
DEFROSTING
This unit is equipped with a "Frost Free" type cooling
system, which means you never have to defrost the
freezer compartment.

ERROR CODES

E1: Freezer sensor failure.
E2: Freezer defrosting sensor failure.
E3: Freezer sensor failure and freezer
defrosting sensor failure.
H: Freezer high temperature.
-15-

Publicidad

Tabla de contenido
loading

Tabla de contenido