Electrical Requirements - Jocel JCV-477L Manual De Instrucciones

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Please ensure that component parts shall be replaced with like components and that servicing shall be done by
factory authorized service personnel, so as to minimize the risk of possible ignition due to incorrect parts or
improper service.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the electrical current.

ELECTRICAL REQUIREMENTS

Due to possible variations in line voltage (caused by overloading of circuits), it is advisable to install a dedicated circuit
from the meter panel. This will help to eliminate current fl uctuation which might cause motor trouble.
IMPORTANT WARNING
An empty freezer is a very dangerous attraction to children. Remove either the gasket
or door from unused appliances, or take some other action that will guarantee it harmless.
DANGER: Risk of child entrapment. Before you throw away your old freezer:
• Take off doors.
• Leave the shelves in place so that children may not easily climb in.
• This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities
may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or train-
ing to operate the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use extension cords or ungrounded (two prongs) adapters.
• If the supply cord is damaged, it must be replaced by Technical Assistance or Qualified Technician.
• WARNING Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• WARNING Do not damage the refrigerant circuit.
• WARNING Do not use electrical appliances inside the food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
• This unit is not designed for outside installation, including installation anywhere that is not temperature controlled
(including garages, porches, carports, etc.).
• Before connecting the appliance to an electrical power supply, let it stand 6 hours. This will reduce the possibility of
malfunctions in the cooling system due to transport handling.
• The freezer system of the appliance is fi lled with refrigerant and insulating substances which should be separate-
ly treated and processed. Call the Technical Assistance our a Qualified Technician or the local authorities.
Be careful not to damage any tubes that may be on the rear wall of the appliance.
ELECTRICAL RATING: The serial rating plate indicates the
voltage and frequency the unit is designed for.
DON'T WAIT! DO IT NOW!
SAVE THESE INSTRUCTIONS!
WARNING
-11-