Configuration - GYS GYSFLASH 30-24 HF Manual De Instrucciones

• Gel/AGM: charging curve for sealed battery (gel, maintenance free, AGM...). For this charging curve the battery capacity in Ah must
be selected. For this charging curve the battery capacity in Ah must be selected.
• Expert: charging curve type IU
By default this curve is inactive and doesn't appear in the curve list of the CHARGE mode. The Expert cruve is only available in the
automotive mode.
AUTOMOTIVE CHARGE MODE

CONFIGURATION

CHARGE
gel/AGM
CHARGE
gel/AGM
CHARGE
CHARGE
gel/AGM
* Charging curves available if activated in EXPERT con guration.
** Only for liquid, gel/AGM and expert charging curves.
STARTING THE AUTOMOTIVE CHARGE
CHARGE 10%
80Ah
gel/AGM
Start up:
• Connect the clamps : red to the (+) and black to the (-) of the battery.
• Push the START/STOP key to start charging, a loading bar displays.
• Push the START/STOP key again to stop the charge.
NB: When the AUTOMOTIVE charge ends (100%), if the battery remains connected the charger maintains the charge level
of the battery by applying a floating voltage.
Precaution: Check the electrolyte level. Fill it up if necessary before charging.
Do not start a traction charge on an automotive battery.
DIAG MODE AND DIAG+ MODE
On a stationary vehicle the GYSFLASH supplies up to 30A (and 15A in 24V) to test high-energy consumers: engine fan, window regu-
lator, electronic suspension, etc... By supplying a steady voltage:
12
GYSFLASH 30-24 HF
I U adjustable via the menu «Avanced Menu» and intented for experimented user (see page 16).
0 0
12V
80Ah
12V 6V
12V
80Ah
24V
easy
12V
gel/AGM
gel/AGM liquid
80Ah
expert*
10Ah
12V
20Ah
...
80Ah
400Ah
CHARGE
gel/AGM
TRACTION CHARGE MODE CONFIGURATION
**
STARTING THE TRACTION CHARGE
100%
TRACTION
80Ah
gel/AGM
6V/12V
24V
*If needed, the charging time can be reduced by entering a capacity
slightly above the rated capacity of the battery (maximum + 20%). E.g.:
For a 100Ah battery, setting the charger on 110Ah allows to reduce the
charging time by around 45min.
TRACTION 12V
80Ah
gel/AGM
TRACTION 12V
gel/AGM 80Ah
TRACTION
12V
gel/AGM
80Ah
TRACTION
12V
80Ah
gel/AGM
TRACTION
10%
80Ah
gel/AGM
TRACTION CHARGING TIME
50 Ah 150 Ah 160 Ah 260 Ah
~ 8h*
50 Ah 70 Ah 80 Ah 130 Ah
~ 8h*
EN
6V
12V
24V
gel/AGM
liquid
50Ah
60Ah
...
260Ah
100%
80Ah
9h 14h
9h 14h