Servicing; Cleaning; Service Intervals - Parker LCMS64 Guia Del Usuario

5 Servicing

The recommended service procedures identified below, along with all other repair and calibration work, should be undertaken by a Parker
Hannifin approved engineer.

5.1 Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.

5.1.1 Service Intervals

Component
Check that the Power On indicator is illuminated and cycles from
Generator
red to green.
Generator Check the drain valve is discharging on a regular basis.
Generator Check for leaks
Generator Check the pressure gauges during operation
Generator Check that there is ventilation clearance around the generator.
Generator Check the condition of electrical supply cables and conduits.
Recommended Service A
Generator
Replace the filters
Recommended Service B
Generator
Replace the compressor (Option 1 only)
Recommended Service C
Generator
Replace the valves
Service
A
B
C
Key:
Check
servicereminder.com
Servicereminder.com is a web based reminder service developed to track when service work is due to be carried out. This ensures that parts can be ordered in
advance and that the service is carried out at the optimum time in accordance with the manufacturers recommendations. This service is free to use, simply log on
to www.servicereminder.com and select New User Registration.
Operation
Essential Procedure
13