Servicing; Cleaning; Service Intervals - Parker LCMS20/3 Serie Guia Del Usuario

5 Servicing

The recommended service procedures identified below, along with all other repair and calibration work, should be undertaken by a Parker
Hannifin approved engineer.

5.1 Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.

5.1.1 Service Intervals

Component
Generator
Generator
Generator
Generator
Generator
Generator
Generator
Generator
Generator
Service
A
B
C
Key:
Check
12
Operation
Check that the Power On indicator is illuminated and cycles from
red to green.
Check the drain valve is discharging on a regular basis.
Check for leaks
Check the pressure gauges during operation
Check that there is ventilation clearance around the generator.
Check the condition of electrical supply cables and conduits.
Recommended Service A
Replace the filters
Recommended Service B
Replace the compressor (Option 1 only)
Recommended Service C
Replace the valves
Essential Procedure