General Information; Tools And Materials - Dometic COOLAIR RTX 1000 Manual De Instalacion Y Uso

General Information

Dometic accepts no liability for damage in the following
cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical
influences and excess voltage
• Alterations to the product without express permission
from Dometic
• Use for purposes other than those described in the
operating manual
Dometic Corporation reserves the right to modify
appearances and specifications without notice.
3 General Information
This section provides information regarding the
tools and materials, component locations, model
identification, external and internal dimensions, and unit
placement.
The images used in this document are for reference
I
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
3 .1

Tools and Materials

Dometic recommends that the following tools and
materials be used:
Included Parts
Cover Frame Universal CoolAir 3rd
Generation
Seal 0.4 in. x 0.8 in.
(10 mm x 20 mm)
Support Bracket
Hex Bolt M8 x 100
Threaded Insert With Flange M8
Threaded Insert With Flange M6
Washer 8.5 x 20 x 1.25
Spring Washer M8
Nut M8
Allen Screw With Cylinder Head
M6 x 110
Spacer 6.2 x 10 x 48
4
Included Parts
Washer M6
Power Cable External Short
RTX 12V
Cable Ties
1/4 in. Hex Bit
80 A Fuse
200 A Fuse Holder
2 A Fuse
Cable Terminals for Battery Cable
AWG 4 3/8 in.
Cable Terminal for Fuse Holder
1/4 in.
Ring Terminal 0.02 in. (0.5 mm)
Joint Connector 0.02 in. (0.5 mm)
2 A Fuse Holder
Loom Tubing 9.8 ft (3 m)
Opening Template
18.9 in. x 15.3 in. (480 mm x
390 mm)
Seal 35 x 20 x 3000
Recommended Tools
Angle Grinder
Cutting Disc for Metal
Extension Cord
Drill
Automotive Staple Remover
Phillips Screwdriver
Quantity
Side Cutters
1
1 x 2.7 mm
2
4
4
4
4
4
4
4
8
Parking Cooler
Quantity
4
1
1
1
1
1
1
2
2
2
1
1
1
1
1
Impact Gun
Screwdriver Bit Set
Hole Saw Set
Self Tapping Screws
Flat Head Screwdriver
Pliers
EN