Charger Safety Instructions; Device Description; Operating Elements; Device Components - SPIT P18 Manual Original

English
18
When the battery is defective, liquid can
escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Cover the battery terminals when storing outside
the charger.
There is danger of fire and explosion through short
circuits caused by metal objects.

Charger safety instructions

Never use the electric device with a damaged
cable. Do not touch the damaged cable and pull
the mains plug when the cable gets damaged
during operation.
Damaged cables increase the risk of electric
shock.
Do not operate the unit on easily inflammable
surfaces (e. g. paper, textiles, etc.) or in
inflammable environments.
Fire hazard due to occurring heat build-up.
Protect the electrical device from rain and
moisture.
The penetration of water in a battery charger
increases the risk of electric shock.
Do not cover the ventilation slots during the
charging process.
They preserve the battery and the battery
charger from overheating.
Do not charge the
manufacturers.
The device is only suitable for the charging of
SPIT batteries. There is otherwise a risk of fire
and explosion.
Keep the battery charger clean.
Contamination may result in danger of electric
shock.
Check the electrical device, cable and plug
each time before using. Do not use the
electrical device when defects are detected.
Do not open the electrical device yourself and
have it repaired only by qualified personnel
using original spare parts.
Damaged electrical devices, cables and plugs
increase the risk of electric shock.
batteries of other
-WARNING-
Caution high voltage! Do not open the
charger!
There is a risk of electric shock.
Ensure that the connection between the
charger and the battery
positioned and is not impeded by foreign
bodies.
There is a risk of fire and explosion through short
circuits caused by metal objects.
Ensure that the
compartment does not have any foreign
objects and protect from dirt and humidity.
The storage location must be dry and frost-
free.
There is a risk of fire and explosion in the case of
a short-circuit.
A charger which is connected to the mains
must always be attended.
There is a risk of fire!

3. Device description

Read all the warnings and instructions before
using the equipment.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
While reading the operating instructions,
unfold the graphics page for the machine and
leave it open.

Operating elements

I Rotational direction switch
II On/Off control switch
III Battery release button
IV Bit
V Adjustment ring for depth stop

Device components

1 Ventilation slots
2 Battery
3 Battery charge level indicator
4 Battery contacts
5 CROCHET Belt
6 Bit holder (Option)
7 Depth stop
Battery charger
8 Battery charger
9 LED charge level indicator
SPIT P18 Lithium
is correctly
battery charging