Machine-Specific Safety Warnings; Battery Safety Instructions - SPIT P18 Manual Original

SPIT P18 Lithium
On inappropriate use, liquid may be leak from
the battery; avoid contact. If contact occurs
accidentally, flush with water. If liquid comes
into contact with the eyes, seek medical help.
Liquid leaking from the battery may cause
irritation or burns.
Have your power tool serviced by a qualified
repair person using only original spare parts.
This will ensure that the safety of the power tool
is maintained.

Machine-specific Safety Warnings

Wear hearing protection.
The effects of noise can cause loss
of hearing capacity
Wear safety gloves.
Hold the machinewith a firm grip.
High reaction torque can briefly occur while driving
in and loosening screws.
Always assume a safe standing position and
hold the power tool securely in both hands.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Pene trating a water line causes
damage to property or electric shock.
Hold power tool by insulated gripping surfaces,
when performing an operation where fastener
may contact hidden wiring.
Cutting accessory and fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Secure the workpiece.
A workpiece clamped with clamping devices or in
a vice is held more secure than by hand.
Do not work on stone containing crystalline
silica (SiO2).
This will produce dust which is dangerous to
your health.
Do not work on materials containing asbestos.
Asbestos is considered carcinogenic!
Take protective measures if there is danger of
formation of combustible or explosive dust
during operation that can be hazardous to
health.
Example: Some dusts can be carcinogenic. Wear
a dust mask and work with a dust/chip extraction
unit, if possible to connect.
Always wait until the machine has come to a
complete stop before placing it down.
The tool insert can jam and lead to loss of control
over the power tool.
Tools not in use must be locked away safely
in a dry place out of the reach of children.
Switch the power tool off immediately if the
tool insert gets jammed. Be prepared for high
torque levels if the tool kicks back.
The tool insert jams if:
 the power tool becomes overloaded or
 the tool tilts in the workpiece.
Residual risk. Although this information sheet
and the operating manuals for our electrical
tools contain extensive instructions on safe
working with electrical tools, every electrical
tool involves certain residual risks that
cannot be completely prevented through
safety mechanisms. Therefore, electrical tools
must always be operated with the necessary
caution.

Battery safety instructions

Do not use faulty or deformed batteries.
There is a risk of explosion.
Do not open the battery.
Danger of shortcircuiting.
Never short-circuit the battery.
There is a risk of explosion.
Protect the battery
temperatures over 50°C, e. g., also against
continuous sun irradiation and fire.
There is a risk of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide for
fresh air and seek medical help in case of
complaints.
The vapours can irritate the respiratory system.
English
17
against heat or