Mitsubishi Electric PFAV-P250VM-E Manual De Instalación página 6

6
• P750·P900-F models
[Fig. 6.1.7]
A Gas refrigerant line
B Liquid refrigerant line
[Fig. 6.1.9]
A <Inside the indoor unit>
B Refrigerant pipe
(field supplied)
C Side (or rear) panel
6
[Fig. 6.2.1]
100 mm
or more
A Machine
A Machine
room
room
C Drain
B Drain Pan
[Fig. 6.2.3]
A Unit A Unit
h
B Drain pan C Open sewer
6
50mm
D Pipe cover (field supplied)
or more
100 mm or
more
50 mm or more
B Drain Pan C Drain
2h
h
B Drain pan C Open sewer
6.1
[Fig. 6.1.8]
B Cutoff
6.2
[Fig. 6.2.2]
A Drain plug
B Heat insulation cap
[Fig. 6.2.4]
A Guard securing screws
A Cut off the charging pipe
on the closed-end gas
pipe to release the
nitrogen gas inside the
pipe.
C Side panel
through hole
D Remove the separator
B Drain pan securing screws