CEMO CENTRI SP 30 Manual De Instrucciones página 12

GB
Contents
1. General
1.1 Safety
1.1.1 Maintenance and monitoring
1.1.2 Using original parts
1.1.3 Operating the filling station
1.1.4 Warning notices on the filling
station
1.2 Correct usage
1.2.1 Diesel trolley to ADR 1.1.3.1 c)
1.2.2 Summary
1.3 Inappropriate use
2. Technical data
2.1 Tank
2.2 Pump
2.3 Delivery nozzle
2.4 Battery
3. Layout
4. Using the equipment for the first time
5. Operation
5.1 Storage
5.2 Moving the diesel trolley
5.3 Loading
5.4 Transporting
5.5 Filling the tank
5.6 Filling
6. Maintenance and inspection
6.1 Safety measures
6.2 Maintenance and inspection table
7. Decommissioning
8. Warranty
9. Conformity Declaration to Machinery
Directive 2006/42/EC Appendix II 1.A
12
1. General
The mobile diesel filling station is state of the art
technology and complies with approved techni-
cal safety regulations.
The filling station carries the CE symbol, i.e. the
EU directives and harmonised standards of rele-
vance to the filling station were applied during
design and manufacture.
The filling station may only be used in a techni-
cally flawless condition in the version delivered
by the manufacturer.
For safety reasons, modifications are not allo-
wed to the filling station (except for the addition
of accessories specially provided by the manu-
facturer).
1.1 Safety
Each filling station is tested for function and
safety before despatch.
The filling station is safe to operate when used
correctly.
Incorrect operation or misuse poses a
dangerous risk with regard to:
• serious or fatal injury to the operator
• the filling station and other assets of the
operator
• impaired function of the installation
In order to avoid risks to people, animals and
property, please read these operating instruc-
tions prior to using the filling station for the first
time, in particular all safety notices.
Make sure that:
• you understand all the safety notices
• the operator of the filling station is informed
about the notices and understands them
• the operating instructions are to hand and
placed near the filling station
1.1.1 Maintenance and monitoring
The filling station must be regularly checked to
ensure it is in a safe condition.
In particular, this check includes:
• a visual inspection for leaks (seal of filling
hose and fittings)
• a function test
• completeness/identifiability of the warning,
mandatory and prohibitory signs on the
installation
• the prescribed regular inspections
(for details see section 6).