Conformity Declaration To Machinery; By The Manufacturer - CEMO CENTRI SP 30 Manual De Instrucciones

Sistema de depósito diésel móvil
Ocultar thumbs Ver también para CENTRI SP 30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
9. Conformity Declaration
DT-Mobil Easy and Diesel trolley to ADR 1.1.3.1 c)
EC Conformity Declaration to Machinery Directive 2006/42/EC Appendix II 1.A
The manufacturer / distributor
CEMO GmbH
In den Backenländern 5
D-71384 Weinstadt
hereby declares that the following product
Product designation:
Make:
Type designation:
Serial numbers:
Description:
Mobile diesel filling station (IBC) with single-wall PE tank (as per ADR provision 1.1.3.1c)
of various capacities (60 l, 100 l, 125 l, 200 l, 430 l)
complies with all relevant specifications from the above named directive,
including its amendments applicable at the time of the declaration.
The machine also complies with the protection targets of low voltage directive 2006/95/EC.
The following harmonised standards were applied:
EN 349:1993+A1:2008
EN 60204-1:2006/A1:2009
EN 60204-1:2006
EN 809:1998+A1:2009
EN ISO 12100:2010
EN ISO 13857:2008
Name and address of legal entity authorised to assemble the technical documentation:
see above (= manufacturer)
Location:
Date:
_______________________________________
(Signature)
Eberhard Manz, Managing Director CEMO GmbH
20
Mobile diesel filling station
CEMO
DT-Mobil Easy / Diesel trolley
8709, 8830, 8872, 8917 - 8919, 8921-8925, 8928, 8960-8961,
10004, 10005, 10013, 10074-10075, 10161, 10218, 10319, 10323,
10456, 10457, 10506, 10610, 10611, 10609
Safety of machinery - Minimum gaps to avoid crushing of parts of the
human body
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:205/A1:2008)
Safety of machinery - Electrical equipment of machines –
Part 1: General requirements (IEC 60204-1:200 (modified)
Pumps and pump units for liquids - Common safety requirements
Safety of machinery – General principles of design –
Risk assessment and risk reduction
Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs (ISO 13857:2008)
Weinstadt
02.03.2015

Publicidad

Tabla de contenido
loading

Tabla de contenido