Using The Equipment For The First Time - CEMO CENTRI SP 30 Manual De Instrucciones

4. Using the equipment
for the first time
1. Affix the stickers enclosed with the tank
documents permanently to the front panels.
2. Fasten both hose holders to tank using
screws (M6 x 10).
Wind up hose.
Insert automatic delivery nozzle into
the integrated holder and secure using
the delivery nozzle lock.
3. Place the diesel trolley in a horizontal position
Filling the tank.
4. Perform a test filling as described in section
Hazard label
5. Close the filling opening with the screw cap.
UN 1202
(for diesel)
The filling station is now ready for operation.
and remove screw cap a .
i
Important!
Please always use an automatic delivery
nozzle to avoid overflows
5.6, but hold the delivery nozzle in the still
open filling opening.
i Important!
Never operate the pump without liquid
(no running empty)
Also close the ventilation cap in the screw
cap.
GB
Screw cap
Ventilation
cap
Fig. 01
15