THOMSON THM 80 IX Manual De Instrucciones página 25

GB
With this function, the appliance will operate in economical mode.
NOTE: Before activating holiday function, remove perishable foods from the fridge compartment and
close the fridge door. It is not necessary to remove foods from the freezer compartment.
Repeatedly touch Select until the symbol flashes on the display and then press OK to confirm. The
symbol will stop flashing to indicate the holiday function is activated.
To deactivate the function, repeatedly touch Select until the symbol flashes again and then press OK to
confirm. The symbol will disappear from the display.
When the function is deactivated, the display will restore the set temperatures of the fridge and freezer
compartments.
Fridge switch off
Repeatedly touch Select until "off" flashes on the display and then press OK to confirm. "off" will stop
flashing. The display will not show the temperature of the fridge compartment and the fridge
compartment will stop cooling.
To cancel the function, repeatedly touch Select until "off" flashes again and then press OK to confirm.
"off" will disappear from the display. The display will restore the set temperature of the fridge
compartment and the fridge compartment will resume operation.
Super freezing
This function will help food to freeze quickly and retain its nutrients, vitamins, flavours and appearance.
To activate this function, touch this button. "SF" and the fast freezing symbol
will appear on the display.
This function will be automatically deactivated after 26 hours of operation or after the Eco function is
activated.
Alarm
Door open alarm:
When the fridge door is left open or not closed completely for about 3 minutes, the appliance will sound
an alarm. Close the fridge door then the alarm will stop.
Temperature alarm:
If the temperature in the freezer compartment is higher than ‐10°C, the temperature of the freezer
compartment will flash on the display until the temperature in the freezer compartment drops below
‐10°C again.
Memory function
The appliance has a memory backup battery system. When the power comes on again after a power
failure, the appliance will recall the last settings and resume operation.
Error codes
When an error occurs in the appliance, the display will show the corresponding error code such as E0, E1
or E2. Please contact the local authorised service centre.
10