Sony Atrac3plus ZS-YN7 Manual De Instrucciones página 27

The type of jack
on the component
to be connected
Optical miniplug
(MiniDisc recorder, etc.)
Square-shaped optical
connector (MiniDisc
recorder, DAT recorder, etc.)
1
Open the MD Link jack cover of this
player and connect the OPTICAL
DIGITAL OUT (CD) jack to the digital
input jack of the MiniDisc recorder or
other component using a digital
connecting cable (not supplied) .
2
Turn this player and the connected
component on.
3
Get the connected component ready for
recording.
4
Start playing an audio CD on this
player.
Note
You cannot record an ATRAC CD/MP3 CD.
Model Listening to a TV, VCR or
number of
MiniDisc player/recorder
the
connecting
cable
TV, VCR, MiniDisc
POC-15AB
player/recorder,
etc.
POC-15A
to line
output
jack
* For a MiniDisc recorder: a cable with a stereo-
mini plug on both ends.
For a TV or VCR: a cable with a stereo-mini
plug on one end and two phono plugs on the
other end.
1
2
3
Note
Connect the cords securely to avoid any
malfunction.
Audio
connecting
cable*(not
supplied)
Open the MD Link jack cover of this
player and connect the LINE IN jack to
the line output jack of the MiniDisc
player or other component using an
audio connecting cable (not supplied) .
Turn this player and the connected
component on.
Press LINE and start playing sound on
the connected component.
The sound from the connected
component is output from the speakers.
MD Link
to LINE IN
jack
GB
27